Tri Band 2G 900MHz+3G 2100MHz+4GFDD-LTE 2600MHz Mobile Signal Booster + Ceil/Log
OverviewFree delivery, Cash on delivery, Returnable in 14 days without any reason
LCD Display !!!
4G LTE FDD 2600MHz 3G W-CDMA 2100MHz 2G GSM 900MHz Tri Band Mobile Phone Signal Booster
Up Link: 890MHz--915MHz,1920MHz - 1990MHz,2500MHz - 2570MHz
Down Link : 935MHz--960MHz,2110MHz - 2180MHz,2620MHz - 2690MHz
Power: -70 ~ -40dBm/FA (1.23MHz)
Up Link: 60±3 Db;
Donw Link : 65±3 Db
Max Output Power: +23dBm
Power Supply: AC 110/220V (used AC/DC Adapter 12V dc)
Compact Design: Indoor Use
Item Diemension: 235 x 185 x 20mm
Connect Mode : N connector
Ambient temperature: -10°C~60°C
LCD display function:
Can display signal strongness which it receives from outdoor antenna ,the signal bar will be full black if the signal is received very good.
Signal coverage area :
1.Support Maximum coverage area is 2000 square meters. ( Depend on the area condition)
2.One indoor antenna only use for about 50 ~100 square meters. (in open space).
If want to make all use of 2000 square meters which the host supports,
need to add more indoor antennas and power divider / splitter.
1 x Signal Booster.
1 x Log Periodic Antenna
1 x Ceiling Antenna.
1 x Power adapter.
1 x 50 ohm 10 meters 50-7 Cable.
1 x 50 ohm 3 meters 50-7 Cable.
1 x Manual.
How Booster/Repeater Works?
Repeaters are designed to fulfill the idea of one and main principle: to fill the areas with
the weak or bad signal and to amplify these low signals in order to provide you with the
communication suitable for you.
Steps that describe the work of Repeater.
1) The outside antenna receives the signal from the nearest mobile base station.
2) The outside antenna sends the received signal through the coax cable to the installed Repeater.
3) The Repeater accepts the low signal and improves it.
4) The improved signal goes to the inside antenna through the connection coax cable.
5) The inside antenna send the improved good signal to your mobile phone.
1) Fix up outdoor antenna on housetop or outside the window and point it to the signal tower.
2) Connect outdoor antenna to “BTS” port in repeater machine through cable.
3) Plug power adaptor into AC power socket.
4) Please adjust the direction of the outdoor antenna, until the signal booster have a good signal,it is very important
5) Connect indoor antenna(s) to “MOBILE’ port in repeater machine through cable also.
6) please check if outdoor and indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 10 meters at least, with a wall between and not in a same horizontal line.